With more than fifty years of experience, of relationships and services to international customers, we have gained an ability to understand and anticipate all aesthetic and technological needs providing high customized performance for each client. We did it and we do it respecting the design rules and procedures of each country. We pay particular attention to all aspects of customization intervening in every detail with Autocad. The beauty of surfaces and the shaping of the edges find in colours the occasions to express character and to make the workplace more comfortable. MONOLITE IPERGRES® is an extremely versatile material that can act on shapes, holes and thicknes.
MONOLITE IPERGRES® is a material that, for its characteristics of resistance, hygiene and sterility, lends itself to scientific electivity. It is possible to realize monolithic worktops, up to 2200 x 1100 mm, accessories and complements for chemical, chemical-pharmaceutical, microbiological, hospital laboratories, etc.
Six reasons to choose the best
-
Worktops in MONOLITE IPERGRES® are very resistant while maintaining a relatively low weight. Its mechanical resistance values are so high to allows a thickness of 20 mm.
-
MONOLITE IPERGRES® has shown to be highly resistant to indirect tensile stress through flexural test. Its resistance values are two – threefold higher than hose performed by marble and granite.
-
MONOLITE IPERGRES® is frost – proof.
-
MONOLITE IPERGRES® fully vitrified and glazed surface cannot absorb grease and liquids, making the surface perfectly hygienic to use. This material cannot get stained because of its impermeability, any detergent can be used.
-
MONOLITE IPERGRES® glazed surface has an excellent abrasion, scoring and scratching resistance. Equal to the one performed by the best granite and even much higher than marble abrasion resistance.
-
MONOLITE IPERGRES® has brilliant impact resistance, about 60% higher than the one shown by “pearl grey granite”.
VARIABLE | VALUE |
---|---|
Density (weight for unit of volume g/cm3) - DIN 51064 | 2.17 |
Weight H20 mm Worktops per Square meter (+/- 5%) | 43.50 |
Weight H28 mm Worktops per Square meter (+/- 5%) | 44.80 |
Weight H38 mm Worktops per Square meter (+/- 5%) | 48.50 |
Dimensional and geometrical properties - UNI EN ISO 10545 - 2 | Compliant |
Colour stability to Light and UV rays - UNI EN ISO 10545 - 16 | Maximum |
Determination of moduls of rupture and breaking strength - EN ISO 10545 - 4 | |
• Average breaking load (N) | 16114 |
• Average breaking strength (N) | 14649 |
• Average Modulus of rupture (N/m2) | 43.10 |
Flexural strength after frost resistance test (EN 100 – MPa) | 40.60 |
Determination of impact resistance by measurement of coefficient of restitution - EN ISO 10545 - 5 | 0.80 |
Determination of deep abrasion, hardness according to Mohs - EN 101 | 6 |
Linear Thermal Expansion Coefficient (10-6 °C-1) - UNI EN ISO 10545 - 8 | 6.50 - 7.00 |
Thermal Shock Resistance - UNI EN ISO 10545 - 9 | OK |
Crazing Resistance - UNI EN ISO 10545 - 11 | OK |
Frost Resistance - UNI EN ISO 10545 - 12 | OK |
Determination of chemical resistance of glazed surface - EN ISO 10545 - 13 | OK |
Determination of stain resistance of glazed surface - EN ISO 10545 - 14 | OK |
Releasing of Dangerous Substances, skid resistance - UNI EN ISO 10545 - 15
Pb Cd |
0.00 0.00 |
Thermal Resistance (exposure up to 10 Hrs.) | up to 900°C |
Behaviour in Fire (Combustible material) - DIN EN 13501 - 1 | NO |
Materials Comparison
(Kyndly offered by our russian customer LAMO)WORKTOPS Eco-logic, Flat, Monoblock
SINKS
LABORATORY
008
Light Glossy Grey001
White002
Beige003
Light Grey004
Light Dotted Grey005
Glossy Dotted Grey007
Grey Blue
20-01 R
Orange08-02 R
Peach01-04 R
Yellow12-01 R
Black02-02 R
Light Green03-01 R
Light Blue09-03 R
Aubergine
20-01
Orange08-02
Peach01-04
Yellow12-01
Black02-02
Light Green03-01
Light Blue09-03
Aubergine
Customized solutions with high performances
We produce modular surfaces, "self-supporting" tops that do not require any other support system and moulded with external rims against overflows. Our proposal provides a very high level of dimensional adaptability and combinability between side by side worktops, with cut-outs for sinks, shaped edges and forms designed specifically for every space, use and combination need.


We export to all countries: Argentina - Belarus - Belgium - China - Czech Republic - France - Great Britain - Greece - Iran - Ireland - Jordan - Malaysia - Poland - Portugal - Romania - Russia - Serbia- Slovenia - Spain - Thailand - Turkey